Asus X900-PI4 Manuale Utente Scaricare il pdf (Pagina 23)

ASUS P4T User’s Manual 23

3. HARDWARE SETUP

3. H/W SETUP

Motherboard Settings

NOTCH KEYS

CONNECTORS

RDRAM (with heat spreader)MOUNTING NOTCH

RIBS (inside socket)

EJECTOR

(TOP VIEW)

P4T

P4T 184-Pin RIMM Sockets

RIMM Sockets

Channel A

Channel B

RIMMA2

RIMMA1

RIMMB2

RIMMB1

C-RIMM

RIMM with Heat Spreader

3.5.1 Installing Memory

The memory module (RIMM / C-RIMM) will fit in only one orientation.

IMPORTANT: Do not touch the memory module’s connectors. Handle the

module only by the edges.

1. Make sure that the notch keys in the module are aligned with the small ribs

inside the RIMM sockets.

2. With the ejectors in the open position (as shown), push down gently but firmly

on the memory module until it snaps into place. The guides on the socket’s

ejectors should go through the two mounting notches on the module and the

ejectors should close. If necessary, push the ejectors inward to secure the module

in place.

Removing Memory

To release a memory module, push both ejectors outward and pull the module straight

up and out of the RIMM sockets.

WARNING! RIMM modules become extremely hot during operation. To reduce

the risk of personal injury from hot surfaces, allow the modules to cool off before

removing them.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 115 116

Nessun commento

Asus X900-PI4 Manuale Utente Pagina 23