Asus Vintage Manuale Utente Scaricare il pdf (Pagina 29)

ASUS Vintage-S800ASUS Vintage-S800

ASUS Vintage-S800

2-132-13

2-13

To install a PCI or AGP card:

1. Place the chassis on its side.

2. Remove the metal bracket

opposite the slot that you wish

to use.

3. Align the card golden fingers

to the slot and its metal

bracket to the slot opening on

the chassis.

4. Press the card firmly until it is

properly seated on the slot.

5. Secure the card to the chassis

with a bracket screw.

PCI slots (PCI1)PCI slots (PCI1)

PCI slots (PCI1)

Metal bracketMetal bracket

Metal bracket

AGP slot (AGP1)AGP slot (AGP1)

AGP slot (AGP1)

2.7.22.7.2

2.7.2

Expansion card installationExpansion card installation

Expansion card installation

2.7.32.7.3

2.7.3

Configuring an expansion cardConfiguring an expansion card

Configuring an expansion card

After installing the expansion card, configure it by adjusting the software

settings.

1. Turn on the system and change the necessary BIOS settings, if any.

See Chapter 5 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables below.

3. Install the software drivers for the expansion card.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 89 90

Nessun commento

Asus Vintage Manuale Utente Pagina 29